Miele SmartLine Series User Manual

Timer
27
The SmartLine element has to be
switched on if you wish to use the timer.
A duration of between 1minute(:)
and 9hours 59minutes(:) can be
set.
Durations of up to 59minutes are
shown in minutes (0:59) and durations
of more than 60minutes are shown in
hours and minutes. Durations are
entered in the order of hours, followed
by minutes in tens and then units.
Example:
59minutes = 0:59, touch: 5-9
80min = 1:20, touch: 1-2-0
After the first number has been entered,
the timer display will light up constantly.
After the second number has been
entered, the first number will move to
the left. After the third number has been
entered, the first and second numbers
will move to the left.
The timer can be used for the following
2functions:
– to set the minute minder,
– to switch off a cooking zone/heating
element/Tepan Yaki zone automatic-
ally.
The functions can be used at the same
time. The shortest time is always dis-
played and the sensor control
(minute minder) or the indicator light for
automatic switch-off pulsates.
Touch the or sensor control if you
want to show the times remaining
counting down in the background. If
more than one switch-off time is pro-
grammed, touch the sensor control
repeatedly until the corresponding in-
dicator light pulsates.
Minute minder
The minute minder is set using the nu-
merical keybank for the left or front left
cooking zone (depending on model).
Setting the minute minder
 Touch the sensor control.
The timer display starts flashing.
 Set the required time.
Changing the minute minder duration
 Touch the sensor control.
 Set the required time.
Deleting the minute minder duration
 Touch the sensor control re-
peatedly until: appears in the
timer display.

Miele SmartLine Series Specifications

General

Brand	Miele
Model	SmartLine Series
Category	Hob
Language	English