Warning and Safety instructions
10
If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
“Electrical connection” in the “Installation” chapter).
During installation, maintenance and repair work, the downdraft
extractor must be completely disconnected from the mains
electricity supply. It is only completely isolated from the electricity
supply when:
- the mains fuse has been disconnected or
- the screw-out fuses have been fully unscrewed or
- the plug (if present) is removed from the socket. To do this, pull
the plug not the mains connection cable.
To Next Page
Loading...
