Miele SmartLine - Page 44

Installation
*INSTALLATION*
44
a
For maintenance work it must be possible to remove the rear cabinet wall.
The cabinet wall and an adjoining room wall or a piece of furniture must be at
least 110mm apart to ensure sufficient room for the ducting.
b
Duct connecter, adapted to the worktop depth
c
After installation the removable drip tray must be accessible.
2quick-release catches have to be opened at the front and rear to remove the
tray.
d
Duct length must be adapted to the height of the base unit.
Standard delivery 500mm
Installing the length compensation, see chapter “Installation”, section
“Installation – surface-mounted”.
e
Fan
In the plinth on the floor
x Dimension of which the worktop is deeper than 600mm.