Miele SUPERTRONIC - Calibrating the load sensor to zero

Before you can use the washing machine, the load sensor
has to be calibrated to zero as you would with bathroom
scales.
^
Open the drum door. The display will change to show the
main menu again.
^
Select the Settings
! menu.
\
\
\
Settings
10:21
[
[
$ Language !
# Time
! Detergent type / amount
m
^ Scroll up the display until the Load sensor zero setting
option appears.
^ Select this option.
\
Load sensor zero setting
10:21
$ Calibrate the sensor to zero
^ Touch the sensor.
The load sensor will be calibrated to zero.
Switch off the washing machine.
Calibrating the load sensor to zero
24