Miele SUPERTRONIC - Adding or removing laundry after a programme has started

Changing a programme
Within the first five minutes
–
You can change the temperature
–
You can select or deselect the Short, Water plus, Extra
quiet and Extra rinse extra options.
Up until the final spin begins
–
You can change the spin speed
–
You can select or deselect the Rinse hold extra option
Touch the sensor next to Change and alter the setting you
want to change.
Adding or removing laundry after a programme has started
^ Press the / button to open the drum door.
^ Add or remove items.
^ Close the drum door.
The programme will continue automatically.
Please note:
Once a programme has started the machine cannot recog-
nise any adjustment to the load.
For this reason, if laundry is added or removed after the start
of a programme, the machine will always complete the
programme cycle assuming a full load which can lead to a
change in the programme duration shown in the display.
The door cannot be opened if:
–
the suds temperature is above 55°C.
–
the water is above a certain level.
–
the programme has reached the Final spin stage.
If you press the / button when the above conditions are
present, the following will appear in the display:
/ Door locked
5. Start the programme
39