Please refer to the separate booklet for information on programmes available as
additional programme packages.
Programme chart
46
Cottons cold to 90°C Max. load 8.0 kg
Use for Cotton, linen or cotton mix fabric, e.g. table linen, towelling,
underwear, T-shirts etc.
Note The 60°/40°C programmes differ from the r/s programmes
as follows:
–
Shorter programme duration
–
Longer temperature holding times
–
Higher energy consumption
Where particularly high levels of hygiene are required please
select a temperature of 60°C or higher.
Minimum iron cold to 60°C Max. load 3.5 kg
Use for Synthetic, mixed fibre and easy care cotton. If fabrics have a high
proportion of man-made fibres it is advisable to programme the
machine for "Gentle action".
Note Reduce the spin speed for fabric which creases easily.
Cottons r/s Max. load 8.0 kg
Use for Normally soiled cotton garments
Notes – These settings are the most efficient in terms of energy and
water consumption for washing cottons.
– With r the actual wash temperature reached will be lower
than 60°C although the wash performance is the same as with
the standard Cottons 60°C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label with
Directive 1061/2010.
To Next Page
Loading...
