Programme chart
49
Hygiene 30°C to 90°C Max. load 7.0 kg
Use for Cotton and linen fabric which have been in direct contact with the
skin, e.g. underwear, nappies, towelling, bed linen, pillow and
mattress covers or where high standards of hygiene are required.
Notes – For optimum hygiene results select a temperature of 60°C or
above.
– Observe the manufacturer's care label.
First wash cold to 40°C Max. load 3.0 kg
Use for New items made of cotton, towelling and polyester fabric.
Note Use this programme to wash any manufacturing residues out of
new items.
Proofing 40°C Max. load 2.5 kg
Use for Treating microfibre fabric, skiwear, and table linen made from
mainly synthetic fibres to provide a water and stain resistant finish.
Notes
–
The items should be freshly laundered and spun or dried before
proofing.
–
For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Outerwear cold to 40°C Max. load 2.5 kg
Use for Outerwear made from membrane fabric such as Gore-Tex
®
,
SYMPATEX
®
, WINDSTOPPER
®
etc.
Notes
–
Zip up jackets before washing.
–
Do not use fabric conditioner.
–
If wished these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time
the garment is washed.
To Next Page
Loading...
