EasyManua.ls Logo

Miele T 260 - Problem Solving Guide; General Problems and Remedies

Miele T 260
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
With the help of the following notes minor faults in the performance of the appli
-
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suit
-
ably qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The man
-
ufacturer cannot be held liable for unauthorised work.
General problems
Problem Possible cause Remedy
The appliance fails to
start when switched on.
No obvious cause. Have you followed the
switch-on procedure cor
-
rectly (see “How to dry
correctly”)?
Is the plug correctly in-
serted in the socket and
switched on?
Is the door closed prop-
erly?
Has the fuse or circuit
breaker tripped?
Items made of synthetic
fibres are charged with
static electricity after
drying.
Static charge can be re-
duced by adding a fabric
conditioner to the final
rinse in the washing ma
-
chine or a fabric condi
-
tioner sheet to the load in
the dryer.
Problem solving guide
23

Table of Contents

Related product manuals