Memory
The additional options selected previ
-
ously for specific programmes are
stored in the machine’s memory.
The machine is delivered with this pro
-
grammable function deactivated. It can
be activated is wished.
Programming and
storing in memory
The programmable functions are acti
-
vated to call up further features not
shown on the control panel by using the
additional option buttons in combina-
tion with the programme selector.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish
.
A Press the additional option buttons
Short
and
Low temperature
at the
same time, hold pressed in and ...
B ... switch on the dryer with the
I-ON / 0-OFF button.
C Let go of all these buttons.
–
"P" will appear in the display.
–
The
Drying
and
Cool air
indicator
lights will flash.
D Turn the programme selector to
COTTONS, normal.
E The number of the programmable
function will flash alternately with the
"P" on the left
of the display -
P: P...3...P... 3... .
The number on the right
will show
constantly:
0 = Memory function - off
1 = Memory function - on
F Press the START button to change
the number on the right from
0 to 1 =on
or from
1 to 0 =off
.
The setting you have selected is now
stored in memory.
G Switch the machine off with the
I-ON/0-OFF button.
To check:
^ Carry out steps A to E.
^ Switch off the dryer.
The check is complete.
Programmable functions
49
To Next Page
Loading...
