EasyManuals Logo

Miele T 8007 WP SUPERTRONIC User Manual

Miele T 8007 WP SUPERTRONIC
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
~
Please observe the instructions in "Installation and connection"
and "Technical data".
~
The socket must be easily accessible after installation in order to
disconnect the tumble dryer from the electricity supply.
~
Do not block the gap between the base of the tumble dryer and
the floor with plinth facings, deep pile carpet etc. as this would
hinder a sufficient intake of air.
~
Make sure the tumble dryer door can be opened without
hindrance after installation.
Correct use
~
The maximum load of dry laundry for this tumble dryer is 8 kg.
See the Programme chart for the maximum recommended loads in
individual programmes.
~
Fire hazard.
The tumble dryer must not be connected to a controllable socket
(e.g. a timer switch or a peak load shut-off device).
If the drying programme were to be interrupted before the end of the
cooling down phase, the laundry could self-ignite.
Warning and Safety instructions
10

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele T 8007 WP SUPERTRONIC and is the answer not in the manual?

Miele T 8007 WP SUPERTRONIC Specifications

General IconGeneral
BrandMiele
ModelT 8007 WP SUPERTRONIC
CategoryDryer
LanguageEnglish

Related product manuals