Cleaning the surfaces of the
fluff filters
When to clean
Clean the surfaces of the fluff filters
in the door and the door opening
after each drying programme.
Cleaning them whilst dry
Note: You can also use a vacuum
cleaner to remove the fluff.
1 Fluff filter
2 Door seal
^
Open the door and pull the fluff filter
(1) out of the door as illustrated.
^
Remove any fluff from the hollow part
of the door with a bottle brush or a
vacuum cleaner.
^
Also clean the door seal (2) with a
damp cloth.
^
Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
^
Use your fingers or a vacuum cleaner
to remove the fluff from the two fluff
filters in the door opening.
^
Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way.
^
Close the door.
Cleaning and care
42
To Next Page
Loading...
