Fine filter
When to clean
Only clean the fine filter when Clean
the plinth filter which is located in
front of the heat-exchanger appears
in the display.
^
To delete the message: Touch the
OK sensor.
Removing the fine filter
^
Switch the dryer off.
On the front left of the tumble dryer:
^
Press to open the access panel for
the fine filter (see arrow).
The panel will spring open.
^
Pull the filter out by the handle.
^ Pull the handle out of the filter.
Cleaning the fine filter
^
Clean the fine filter thoroughly under
running water.
^
Then squeeze it thoroughly.
,
It must not be replaced dripping
wet as this can cause a fault.
^
Use a damp cloth to remove any fluff
from the handle.
Cleaning and care
44
To Next Page
Loading...
Need help?
General
