Cleaning the cover for the fine filter
^ Use a damp cloth to remove any
fluff. Make sure that you do not
damage the rubber seal when doing
this.
^ Check whether the cooling fins are
blocked with fluff (as follows).
Cleaning the heat exchanger
,
Danger of injury.
Do not touch the cooling fins. You
could cut yourself.
,
Prevent damage.
Carefully pass the vacuum cleaner
brush over the surface, without
applying any pressure.
Otherwise the cooling fins or the
struts in front of them could become
damaged.
Visible soiling:
^
Remove any visible soiling carefully
with a vacuum cleaner using a
dusting brush or a narrow crevice
nozzle.
Cleaning and care
45
To Next Page
Loading...
Need help?
General
