How to dry correctly
17
Selecting a programme
Turn the programme selector to the
required programme.
Starting the programme
Press the flashing Start button.
The indicator light for the Start button
will now light up constantly.
Please note: The programme duration
shown in the display is an estimation
and can vary.
Removing the laundry at the end
of the programme
There is a cooling down phase at the
end of the drying sequence. The
programme is not finished until lights
up and the buzzer sounds.
After the programme has finished, the
drum will continue to rotate in a special
rhythm, depending on the programme
selected, to prevent creasing, if you do
not wish to remove it immediately (Anti-
crease phase). There is no Anti-crease
phase at the end of the Woollens
handcare programme. The duration of
the Anti-crease phase is variable (see
"Programmable functions").
Press the Door button.
Open the door.
Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
Press the button to switch the
dryer off.
Clean the fluff filters.
Close the door.
Empty the condensed water
container.
Useful tip: If condensed water is
drained away via the drain hose, the
condensed water container does not
have to be emptied.
To Next Page
Loading...
