EasyManua.ls Logo

Miele TDA 150 C - Checking the heat exchanger unit

Miele TDA 150 C
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and care
27
Pull the condenser unit out of its
housing by the handle.
Checking the heat exchanger unit
Hold the condenser unit up to the
light as shown.
Check to see if there is any fluff inside
it. The arrows in the illustration above
indicate where to look.
If you cannot see any fluff:
Refit the condenser unit (see
following page).
If you can see some fluff:
Clean the condenser unit as
described below.
Cleaning the condenser unit
When rinsing the condenser unit, make
sure you position it as shown in the
next two illustrations.
Use a shower head or similar to rinse
the unit as shown.

Table of Contents

Other manuals for Miele TDA 150 C

Related product manuals