Cleaning and care
28
Then flush the unit through from the
front.
Check the condenser unit again for
any visible fluff and, if necessary,
flush it through again until it has all
gone.
Also make sure that the rubber seals
are clean.
The rubber seals must not be removed
and must be free of kinks.
Shake the water off the condenser
unit until no more droplets of water
are visible.
Checking and cleaning the
condenser unit housing
Remove any soiling still visible inside
the housing by hand using a damp
cloth.
Do not try and access areas you
cannot reach by hand!
To Next Page
Loading...
