Changing the programme sequence
18
Once a programme has
started ...
... changing the programme
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If you try to change a programme,
lights up until the original programme is
reset.
You will need to cancel the current
programme before you can select a
new one.
... cancelling the programme
Turn the programme selector to
Finish.
The items will be cooled down,
depending on the temperature reached
and how long they have been dried for.
The programme is not finished until
lights up.
Switch the dryer off and then on
again.
Select and start a new programme
straight away.
Adding or removing laundry
after a programme has started
Restart the programme
immediately after adding or
removing items.
Otherwise remove all items and
spread them out to cool down
completely.
Danger of burning!
The drum and the items can get very
hot.
Do not touch the back of the drum
when adding or removing items.
Press the Door button.
Add or remove items.
Close the door.
Press the Start button.
Programme duration
Altering the programme sequence can
cause adjustments in the h min display.
To Next Page
Loading...
