Programmable functions
49
Extending the range of the
drying level for the "Cottons"
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible. However, if you require the
laundry to be drier or damper, you can
reduce or increase the default residual
moisture in this programme.
Exception: The Normal dying level
remains unchanged.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure the
following:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
Press the Start button and keep it
pressed in whilst carrying out steps
-.
Switch the tumble dryer on.
Wait until the indicator light for the
Start button lights up constantly . . .
. . . and then release the Start button.
The Empty the container indicator light
will flash once.
The option selected will be displayed
by a number which will alternate with
.
Laundry will be damper
Factory default setting
(The Clean out airways indicator light
will also flash once)
Laundry will be drier
(The Clean out airways indicator light
will also flash twice)
Pressing the Start button switches
between the options.
Switch the tumble dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
Carry out steps -.
Switch the dryer off after checking
the indicator lights.
To Next Page
Loading...
