Miele W 6071 - Skipping Program Cycles; Interrupting a Program; Cancelling a Program

Skipping program cycles
Cycles of a program in progress can be
skipped or repeated.
Press the 7 "End" button to stop the
program.
PROGRAMME 11 COTTONS
Main wash
PROGRAMME STOP
PROGRAMME STOP blinks in the display.
Use the 2 "Cursor" to skip ahead to a cycle
in the program.
Use the 1 "Cursor" to move back to a cycle
in the program.
At the position required press X "Start" to
continue the program again.
Interrupting a program
Press 7 "End" to stop the program.
Press X "Start" to restart the program.
Cancelling a program
To cancel a program, press 7 "End" twice.
If the program is interrupted during a cycle,
the following display messages will appear:
PROGRAMME 11 COTTONS
PROGRAMME END
DOOR IS LOCKED
THERE IS WATER IN THE MACHINE
or
PROGRAMME 11 COTTONS
PROGRAMME END
DOOR IS LOCKED
DRUM NOT YET STATIONARY
^
Select the Drain or Spin program and
press the X "Start" button. The door can
be opened once the water is drained.
Special options
23