Delay start
Use the W "Delay start" button to program
the unit to start automatically at a later time.
^
Turn the key to position B "Operation".
^
Turn on the machine and select a program
with the program selector.
The display shows the following (example):
PROGRAMME 11 COTTONS
>90°C> Main wash 1
Rinse 3 1200 RPM
^
Press W "Delay Start".
Here the display shows the following:
PROGRAMME 11 COTTONS
Start time >14< : 30 hrs
After the time has been set
press the Start button
The current time of day (military time) is
displayed first.
The cursor points to the input field for
‘hours’.
^ Select the start time with 34"Minus or
Plus" buttons.
^
Position the cursor on the input field for
minutes and select the minutes with 34
"Minus / Plus".
^
Press X "Start" to confirm the delayed
start. The following will appear in the
display:
PROGRAMME 11 COTTONS
90°C Main wash1
Start time 18 : 30 hrs
When the start time is reached the program
begins and the display shows the program
sequence. If W "Delay start" is pressed
during the program, the actual time of day
and date are shown.
If 7 "End" is pressed the delay start function
will be cancelled.
Special options
24
?
?
To Next Page
Loading...
