Changing the programme sequence
38
Changing a programme or
adding/removing laundry
After the successful start of a pro-
gramme it is no longer possible to se-
lect a different programme.
After the start of a programme it is no
longer possible to open the door.
If you would like to change the pro-
gramme or add/remove laundry, you
must cancel the programme.
Cancelling a programme
You can cancel a programme at any
time after it has started:
Touch the Start/Stop sensor.
The water is pumped out, the time dis-
play changes to :. As soon as the
symbol goes out in the control panel,
the programme has been cancelled and
the door can be opened.
Selecting a different programme after
cancelling the programme
Open the door.
Close the door.
Check that there is still detergent in
the dispenser drawer. Add more de-
tergent if necessary.
Turn the programme selector to the
programme you want and start it by
pressing the Start/Stop sensor.
Removing laundry after cancelling
the programme
If you want to remove the laundry when
it is dripping wet:
Open the door.
Remove the laundry.
If you want to remove the laundry after
it has been spun (damp):
Open the door.
Close the door.
Turn the programme selector to
Drain/Spin.
Tip: Select an appropriate spin speed.
Touch the Start/Stop sensor.
The laundry is spun and after spinning,
it can be removed, damp.
Interrupting a programme
Turn the programme selector to the
position.
The washing machine switches off.
To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.
Tip: If appears in the time display,
the programme selector is in the incor-
rect position.
To Next Page
Loading...
