Miele WDB 030 - Programmable Functions; Function selection and customization

Programmable functions
69
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program-
mable functions can be altered at any
time.
The programming is carried out in eight
steps (, ,  ... ) using the sensor
controls.
Accessing the programming
level
Pre-requisites:
– The washing machine is switched on
(the programme selector is pointing
to a wash programme).
– The washing machine door is open.
 Touch the Start/Stop sensor and
leave your finger on it whilst carrying
out steps -.
 Close the washing machine door.
Wait until the Start/Stop sensor lights
up constantly ...
 ... and then take your finger off the
Start/Stop sensor.
After approx. four seconds,  will light
up in the time display.
Choosing and selecting the
programmable function
The number of the programmable
function will appear in the display as 
and a number: e.g. .
 Touch the  or  sensor to scroll to
the next or previous programmable
function:
Programmable functions
 Keypad tone
 Lock code
 Control panel switch-off status
 Washing machine switch-off
status
 Memory
 Longer pre-wash Cottons
 Soak duration
 Gentle action
 Reduce temp.
 Water plus
 Water plus level
 Maximum rinse level
 Suds cooling
 Anti-crease
 Backlight brightness dimmed
 Confirm the selected programmable
function by pressing the Start/Stop
sensor.