USER’S MANUAL MIG
____________________________________________________________________
____________________________________________________________________________________
MATT di LIEVORE SRL Via Bianche 7 36010 Carre’ ( VI ) Tel. 0445 / 892223 Fax 0445 / 390346
3. POSITIONING FOR BASE PLATE
prepare the sub structure in
order to fix base plate,
respecting approximately
measures like Fig. 2
4. POSITIONING OF GEAR MOTOR
Position the gear motors (Fig. 3) on
the great plate (A), using the
appropriate
screws supplied. The right coupling
between rack and pinion may be
carried out by registering of fixing
the small
plates (B) to the great, through the
eyelets associated. unlock the gear
motors, through appropriate
release lever
(Fig. 4). For the following
positioning and attaching the rack.
To Next Page
Loading...