Migatronic OMEGA 400 - Technical Specifications; Power Source Data

27
TECHNICAL DATA
Power source:
OMEGA
220
OMEGA
220 Boost
OMEGA
300
OMEGA
300 Boost
OMEGA
270 MINI
OMEGA
400
OMEGA
400 S
Mains voltage
(50Hz-60Hz) ±15%
3 x 400V 3 x 230/400V 3x400V 3 x 230/400V 3x400V 3x400V 3x400V
Mains voltage
(50Hz-60Hz) ±15%
1 x 230V 1 x 230V
1
Minimum
short-circuit power Ssc
4.0MVA 4.0MVA
Fuse 10A 16A 10A 16A 10A 20A 20A
Mains current, effective 6.0A 7.1A 7.6A 10.5A 6.8A 17.4A 17.4A
Mains current, max. 10.1A 29.9A 13.2A 42.0A 13.2A 26.0A 26.0A
Power, (100%) 4.2kVA 1.6kVA 5.3kVA 2.4kVA 4.7kVA 12.1kVA 12.1kVA
Power, max 7.0kVA 6.9kVA 9.1kVA 9.7kVA 9.1kVA 18.0kVA 18.0kVA
Open circuit powe
r
20W 30W 20W 30W 20W 40W 40W
Efficienc
y
0.90 0.84 0.88 0.84 0.88 0.85 0.85
Efficiency facto
r
0.87 0.99 0.93 0.99 0.93 0.94 0.94
Current range 10-220A 10-220A 10-300A 10-300A 10-270A 10-400A 10-400A
MIG MMA MIG MMA
Duty cycle 100% at 20°C 180A 115A (140A)* 230A 150A (180A)* 210A 335A 335A 335A 335A
Duty cycle 60% at 20°C 220A 150A (175A)* 245A 180A (200A)* 230A 400A 400A 400A 400A
Duty cycle 100% at 40°C 145A 70A (81A)* 175A 95A (107A)* 160A 300A 300A 300A 300A
Duty cycle 60% at 40°C 170A 86A (108A)* 195A 110A (126A)* 180A 370A 365A 370A 365A
Duty cycle max. at 40°C 30% 14% (16%)* 24% 12% (13%)* 22% 50% 45% 50% 45%
Open circuit voltage 52V 52 V 52V 52 V 52V 70V 70V
2
Sphere of application
S
S
S
S
S
S
S
3
Protection class IP 23 IP 23 IP 23 IP 23 IP 23 IP 23 IP 23
Standards
EN/IEC60974-1
EN/IEC60974-5
EN/IEC60974-10 (Class A)
EN/IEC60974-1
EN/IEC60974-2
EN/IEC60974-5
EN/IEC60974-10 (Class A)
Dimensions (hxwxl)
55x25x64 cm 29x22x57 cm 63x25x65 cm 134x50x94 cm
Weight
25 kg 27 kg 26 kg 28 kg 19 kg 36.5 kg 79 kg
Wire feed speed
18 m/min 18 m/min 18 m/min 18 m/min 18 m/min 27 m/min 27 m/min
* Data for Boost-version are stated at 1x230V mains supply
Data in parenthesis are stated at 3x400V mains supply
1
This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated data
in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if
necessary, that the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned table.
2
S
This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks
3
Equipment marked IP23 is designed for indoor and outdoor applications