16 17
Technical data
1) This equipment complies with EN / IEC61000-3-12:2014 (/ 2011) provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to
the stated data in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network
operator if necessary, that the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the abovementioned
table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks
3) Equipment marked IP23 is designed for indoor and outdoor applications
POWER SOURCE OMEGA
2
300 OMEGA
2
300 Boost
Mains voltage ±15% (50-60Hz), V 3x400 3x230-400. 1x230-400
Minimum generator size, kVA 17 15.5 (1x230). 16.5 (3x230). 15.5 (3x400)
1
Minimum short-circuit power Ssc, MVA 0.8 (1x230). 2.1 (3x230). 2.1 (3x400)
Fuse, A 10 16
Mains current, effective, A 9.0 11.9 (1x230). 7.0 (3x230). 3.1 (3x400)
Mains current, max., A 16.9 45.3 (1x230). 26.7 (3x230). 15.0 (3x400)
Power, (100%), kVA 6.3 2.7 (1x230). 3.8 (3x230). 3.5 (3x400)
Power, max., kVA 11.5 10.4 (1x230). 11.0 (3x230). 10.3 (3x400)
Power, open circuit, W 20 30
Efficiency, % 88 84 (1x230) 84 (3x230) 87 (3x400)
Power faktor 0.93 0.99 (1x230). 0.95 (3x230). 0.95 (3x400)
MIG MMA
Duty cycle 100% 20°C, A/V 230/25.5 - 170 (1x230) 200 (3x400)
Duty cycle 60% 20°C, A 245/26.3 - 220/25 (1x230) 235/25.7 (3x400)
Duty cycle 100% 40°C, A/V 175/22.8 175/27 110/19.1 (1x230) 135/21.0 (3x400)
Duty cycle 60% 40°C, A/V 195/23.8 195/27.8 135/20.8 (1x230) 170/22.5 (3x400)
Duty cycle max. 40°C, A/%/V 300/24/29.0 300/20/32 300/15/29.3 (1x230) 300/24/28.9 (3x400)
Current range, A 15-300 0 - 300
15-300
Open circuit voltage, V 52 55
2
Sphere of application S/CE S/CE
3
Protection class IP23 IP23
Standards EN/IEC60974-1. EN/IEC60974-5. EN/IEC60974-10 CL.A
Dimensions (HxWxL), mm 550x250x640 550x250x640
Weight, kg 26 28
Wire feed speed, m/min 1.5-18 1.5-18.0
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: OMEGA
2
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards: EN IEC60974-1:2018/A1:2019
EN IEC60974-5:2019
EN / IEC60974-10:2014/A1:2015
Regulation: 2019/1784/EU
Issued in Fjerritslev 10.02.2021
Kristian M. Madsen
CEO
To Next Page
Loading...
