MILESTONE
USER MANUAL
ETHOS EZ User manual MA073-006 Terminal chapter Page - 59 -
[ml] or [g]
Quantity of added chemicals.
User can select between milliliter and gram.
ENTER WEIGHT
The sample weight can be entered manually over the keyboard/Touch screen. The most
comfortable method is however the direct transmission of the data of the electronic balance to the
terminal over an interface cable.
If the cells tare or T+S are selected, then new symbols will show on the table, which allow direct
reading of the weight data from the balance.
Transfer of Weight (Sample Weights)
Weight Transfer from Balance
Precisa Balance: The weight is constantly updated on the terminal.
The value is taken over in the sample table touching the
Balance
icon.
Other Balances: Touching on the print function of the balance, the
weight will be transferred to the terminal and entered into the active
record.
Automatic Tare
AUTOMATIC TARE
Touching the Auto zero symbol, the terminal display is set to zero
(tared). For Precisa balance, also the balance is tared at the same
time.
Addition of Chemicals/Reagents
Touching twice one cell in the columns from
Chem1
to
Chem3
will open a window for entering the
name of the chemical/reagent.
Double-click on the cell to enter name
To Next Page
