MILESTONE
USER MANUAL
ETHOS EZ User manual MA073-006 Terminal chapter Page - 79 -
Is it correct?
hours the message will appear. If you confirm, the
program will not be limited to 2 hours.
21 If you want to enter the start page
first stop program execution.
To leave the application pages is only allowed after
program stop. Stop the program run or wait until the
program ends.
23 You have already executed a microwave
application without storing these data. If you
leave these pages all data will be lost.
Do you really want to ignore these modifications
and leave these pages ?
You have not yet saved the program run. If you leave
these pages all non-saved data will be lost.
The Program run can be saved in the Register Run.
31 You have already executed a microwave
application without storing these data.
Do you want to ignore the recordings and load
an old graphic file ?
Together with the program run also the related
methods and sample tables are saved. Loading a new
run, the current methods, sample tables and graphics
will be overwritten.
65 Dosing error in program
At least one chemical has not been injected
during the run. Please search in your protocol
for dosing points marked with "skipped" or
"failed".
An error in the dosing occurred during program run.
Sample Table
Nr. Text Description/Remarks
30 You have made changes on your sample
table. If you load an old sample table your
modifications will be lost.
Do you want to ignore these modifications and
load an old sample table ?
Loading a sample table the current one will be
overwritten.
35 With this command all lines of your sample table
will be deleted.
Do you really want to delete all samples ?
Security question before deleting a modified sample
table from the working memory.
40 You have changes on your sample table
without saving them. If you logout the sample
table will be lost.
Do you really want to ignore these modifications
and logout from your panel ?
The sample table remains – contrary to method and
run – when you go out and return into the same
application. If you log out the sample table is lost.
Internal memory, Flash Card and Signature
54 The system recommends you to purge
your history trail. Only former entries
and user logins will be removed.
The internal memory is almost full. The Administrator
should purge the history trail (see corresponding
chapter). 100 entries will remain after clearing.
39 You have signed your run but you have not
saved it.
The Signature remain only after saving.
To Next Page
Loading...
