MILESTONE
GETTING STARTED GUIDE
Ethos EZ User manual MA073-006 Getting started Chapter -3-
START USING YOUR ETHOS EZ
Milestone ETHOS EZ can be used with a wide range of rotors, inserts and accessories. In the
following instructions we will quickly show the way to use a Milestone closed vessel digestion
system. The description of Your configuration is fully reported into the ETHOS EZ user manual.
NOTE
Milestone suggests to entirely read the User Manual before to run the unit.
Step DESCRIPTION PICTURE
1 Remove the vessel from the rotor
2
Place the vessel on the balance and weight
the sample*
3 Add the reagents*
4 Close the vessel
5 Connect the temperature sensor
6 Place the vessel complete into the rotor
To Next Page
Loading...
