Song playback from USB stick
The drum module first displays the music files recognized in the ‘SONG’ directory on the USB stick. But you can switch to any
other directory on the medium. From each directory, the first 99 music files are displayed.
Requirements for the music files:
n
MIDI: SMF 0, track number less than 16, PPQN 480 maximum, file size 128 kB maximum.
n
WAV: Bit rate 1536 kbit/s maximum, sampling frequency 48 kHz maximum
n
MP3: Bit rate 320 kbit/s maximum, sampling frequency 48 kHz maximum
If you want to play music files that do not meet these requirements, an error message will appear in the display.
1. Press [SONG].
ð
The name and number of the current song appear in the display.
2. Press [SONG] again.
ð
The display shows the list of WAV, MP3 or MIDI files detected on the USB stick.
3.
Use the arrow buttons ( / /[<] / [>]) to navigate in the list.
4. Press [MENU] to open the ‘SONG’ menu.
Use the arrow buttons ( / ) to select the option ‘USB FOLDER’ to change to another directory on the USB stick. Confirm
with [ENTER].
5.
Press to play and stop the songs.
6.6 Metronome function
Press [CLICK] to turn the click function on and off again. When the Click is running the indicator LED of the button is flashing.
Settings
1.
Use the arrow buttons ( / ) to select the parameter to be changed.
2. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter value.
All changes are immediately effective. Exit the Settings menu by pressing [CLICK] again.
Parameter, display Meaning Value range
TIME SIGNATURE Emphasis on beats 0 … 9/2, 0 … 9/4, 0 … 9/8, 0 … 9/16
VOLUME Click volume 0 … 16
INTERVAL Beats per measure 1/2, 3/8, 1/4, 1/8, 1/12, 1/16
NAME Name and number of the corresponding Click
voice
METRO, CLAVES, STICKS, COWBELL, CLICK, VOICE
OUTPUT Click output for headphones only or also for the
line output
PHONES, ALL (PHONES+OUTPUT)
Operating
MPS-850
17
To Next Page
Loading...
