6 Operating
6.1 Functions
Turning on / off
Check all cable connections for correct fit before turning on
Before switching on, turn the [MASTER VOLUME] control to minimum.
Switch the drum module on or off with the main switch [POWER].
Automatic shutoff
If the device is not in use, it shuts off automatically after a settable time.
To disable the automatic shutdown, use the Utility menu (
Ä
Chapter 6.10 ‘Utility menu’ on page 22).
Adjusting the volume
To set the volume, hit a pad while slowly turning the [MASTER VOLUME] control clockwise.
Reset to factory defaults
To reset the entire drum module to factory settings, turn it off first. Then hold down the [<] and [>] simultaneously and addition-
ally press [POWER] until the display shows ‘Factory Resetting…’.
6.2 Selecting and adjusting drum kits
A drum kit is a compilation in which a certain sound (Voice) and several sound parameters are assigned to each pad. Selecting
different drum kits lets you customise the sound of your drum kit in seconds to the desired music genre. Besides the 30 preprog-
rammed drum kits you can also create, customise and save 20 user drum kits.
Selecting a drum kit
To select a certain drum kit, proceed as follows:
1. Press [KIT].
ð
The display shows the kit list.
2. Use the arrow buttons ([<] / [>]) or the jog wheel to select the desired kit.
The setting is automatically stored.
Operating
e-drum module
12
To Next Page
Loading...
Need help?
General
