n Hi-hat
With the Hi-hat we distinguish between Hi-hat pedal change, open Hi-Hat, closed Hi-hat, Hi-hat pedal and Splash.
– Hi-hat pedal change
When the pedal is pressed in different positions, the voice changes when hitting the Hi-hat pad (similar to an acoustic
drum kit).
– Open Hi-hat
Strike the Hi-hat pad without pressing the pedal.
– Closed Hi-hat
Strike the Hi-hat pad with fully pressed pedal.
– Hi-Hat pedal
Press the Hi-hat controller pedal to generate a closed sound without striking the Hi-hat pad.
– Splash
Play the Hi-hat with fully pressed pedal and then open it suddenly.
6.4 Modifying drum kits
Selecting a drum kit
1. Press [KIT].
ð
The display shows the kit list.
2. Press [KIT] again to go to the User Kits section.
Customising a drum kit
You can assign a special sound to each individual trigger of the drum kit and set multiple sound parameters.
1. Select the desired drum kit with the arrow buttons ([<] / [>]). The selected drum kit is immediately active.
2.
Use the arrow buttons ( / ) to select the parameter to be changed.
3. Use the arrow buttons ([<] / [>]) or the jog wheel to change the parameter value.
Parameter, display Meaning Value range
KIT NAME Drum kit selection Preset: 1 … 30
User: 31 … 50
VOLUME Volume of the pads of the drum kit 0 … 16
EQ HIGH Boost / cut of the high EQ frequencies –12 dB…12 dB
EQ MID Boost / cut of the mid EQ frequencies –12 dB…12 dB
EQ LOW Boost / cut of the low EQ frequencies –12 dB…12 dB
Operating
e-drum module
14
To Next Page
Loading...
Need help?
General
