4
Genuine Miller Accessories
Field Kit Accessories
Desiccant Air Dryer System #195 117
A regenerating inline air dryer system that
eliminates moisture in the air stream to
prevent air tool freeze-ups in cold climates.
Internal thermostat and heating elements
insure good air quality in all climates.
The system can be mounted on the side
of the machine or remotely for truck
mount installations.
AC/DC/Battery Charge/Jump-Start Switch
#195 148 Field
AC TIG welding and 12/24 V battery charge/
jump-starting system.
Weld Ammeter and Voltmeter
#195 131 Field
Panel-mounted AC/DC analog meters to
monitor weld output.
Cold Weather Starting Aids*
#043 959 Field
12 V intake manifold heater.
#195 086 Field
120 V oil pan heater element.
*For extreme cold weather both starting aids
can be used in conjunction.
Engine Filter Kit #246 988 Field
Includes all filters required for proper
engine maintenance. Oil filter, primary and
secondary fuel filter, and primary air filter.
Compressor Filter Kit #246 991 Field
Includes all filters required for proper
compressor maintenance. Oil filter, air filter
and coalescing filter.
FA-1D Lockable Flame
Arrestor Fuel Cap #043 947
Fuel cap can be padlocked to
prevent vandalism. A built-in
flame arrestor prevents
flames or sparks from
entering the fuel tank.
Vandalism
Lockout Kit
#195 118 Field
Lockable hinged
steel panels cover
and protect name
plate gauges and
ignition switch
(padlock included).
Also includes engine
compartment door
lock and key.
Cable Holder
#043 946
Saddle-bag-style
cable holder.
Convenient
wrap-around
storage of
coiled cable for
transportation.
Stores 100 ft of 2/0
cable on each side.
Note: For best results do not weld when cable is coiled!
Protective cover cannot be used with cable holder.
Protective Cover
#194 683 Field
Blue water-resistant
canvas cover resists
stains and mildew,
and protects the
finish of your welder.
Note: Protective cover cannot be used with cable holder.
Battery Lockout/Tagout
Disconnect Switch
#195 120 Field
Lockable battery
disconnect switch for safe
routine maintenance.
Stick (SMAW) Welding
Weld Leads
2/0 Stick Cable Set, 50 ft (15 m)
#173 851
Consists of 50 ft (15 m) 2/0 electrode cable
with holder, and 50 ft (15 m) work cable
with clamp. 350 A, 100% duty cycle.
2/0 Stick Cable Set, 100/50 ft (30.5/15 m)
#043 952
Consists of 100 ft (30.5 m) 2/0 electrode
cable with holder, and 50 ft (15 m) work
cable with clamp. 300 A, 100% duty cycle.
Plasma Cutting
Spectrum
®
375 X-TREME
™
#907 339
Comes complete with protective X-CASE
™
(not shown). See Lit. Index No. PC/9.2.
Spectrum
®
625 X-TREME
™
#907 404
Comes complete with protective X-CASE
™
(not shown). See Lit. Index No. PC/9.6.
Spectrum
®
875 #907 390-01-1
See Lit. Index No. PC/9.8.
To Next Page