31
Weekly:
• Clean the front polycarbonate overlay panel with a soft cloth - pay particular attention to the
window area. Do not use any abrasive cleaning materials.
• Check the functionality of the controls, adjust knob and push button switches.
• Check interconnecting cables for cuts or burns.
• Check security of Amphenol connections.
Monthly:
In addition to the weekly maintenance routine, check the following:
• Check that the sequence of operation is satisfactory.
Annually:
In addition to the weekly and monthly maintenance routines, check the following:
• Check the touch pad areas to ensure that there is no undue wear or splitting of the
polycarbonate surface.
• Carry out the calibration routine to ensure optimum, accurate operation of the control.
• Check the interior of the control for possible loose connections and/or components caused by
vibration or knocks.
• Check the interior of the control for signs of overheating of wires and/or components.
To Next Page
Loading...