Miller Bobcat 225 NT User Manual

12 OM-405
3.2 Dimensions, Weights, and Operating Angles
Dimensions
A
 Do not exceed operating angles while run-
ning or engine damage will occur.
Height 33-1/2 in (851 mm)
B
C
ning or engine damage will occur.
 Do not move or operate unit where it could
Width 18-3/4 in (476 mm)
tip.
Depth 46 in (1164 mm)
D
G
A 18 in (457 mm)
4 Holes
G
25°
B 16-1/2 in (419 mm)
E
25°
°
C 3/4 in (19 mm)
F
25
25°
25
°
D 3-1/8 in (79 mm)
E 32-3/4 in (832 mm)
Weight
F 45-1/2 in (1156 mm)
Onan-Powered Unit: 573 lb (260 kg)
Kohler-Powered Unit: 565 lb (256 kg)
G 13/32 in (10 mm) Dia.
ST-800 426
Engine End
Kohler-Powered Unit: 565 lb (256 kg)
3.3 Auxiliary Power Curve
ST-166 023-A
The auxiliary power curve shows
the auxiliary power in amperes
available at the receptacles.

Miller Bobcat 225 NT Specifications

General

Rated Output Power	8, 000 watts
Engine	Kohler CH730
Fuel Type	Gasoline
Fuel Tank Capacity	12 gallons
AC Output	120/240 V
DC Output	12 V
Engine Type	OHV