OM-283935 Page 9
SECTION 3 − DEFINITIONS
3-1. Additional Safety Symbols And Definitions
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012−05
Drive rolls can injure fingers. Welding wire and drive parts are at welding voltage during operation − keep hands
and metal objects away.
Safe95 2012−05
Beware of electric shock from wiring.
Safe94 2012−08
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012−05
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012−05
>5min
V
V
V
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 5 minutes after
power is turned off before working on unit, OR check input capacitor
voltage, and be sure it is near 0 before touching any parts.
Safe43 2017−04
Notes
To Next Page
Loading...
