26
Lifting By forklift
Instruction
• Approach the machine from any side.
• Spread forks as wide as possible.
• Beware of cables, wires, and other hardware.
• Raise machine only as far as needed to move.
• Small frames up to 20” Y travel – Use minimum 5 foot forks with capacity of
15,000 Lbs.
• Large frames over 20” Y travel – Use minimum 6 foot forks with capacity of
20,000 Lbs.
This machine should only be
moved, loaded/unloaded, or
skidded/unskidded by a
trained and certified machine
mover.
To Next Page
Loading...
Need help?
General
