Milltronics VM25 Instruction Handbook

47
11
12
1 2 3 4 5 6 7 8 9 10
Chapter 7 – 8200 CNC Operation
Milltronics 8200 CNC Front Panel
Power ON
The main power switch is located on the electrical cabinet at the back of the machine.
When main power is switched on, the power to the CNC is also applied.
Power OFF
Before switching off the main power, press the E-Stop button to ensure the machine is
in emergency stop mode.

Milltronics VM25 Specifications

General

Brand	Milltronics
Model	VM25
Category	Industrial Equipment
Language	English