Chapter 1. Machine Description, Identification, and Certification
PELLERIN MILNOR CORPORATION
Chapter 1
Machine Description, Identification,
and Certification
BIUUUF01 (Published) Book specs- Dates: 20120514 / 20120514 / 20120516 Lang: ENG01 Applic: HD6
1.1. About This Milnor
®
Machine—60-series, Divided Cylinder
Washer-extractor
This manual applies to the Milnor products whose model numbers are listed inside the front cover
and which are in the families of machines defined below.
1.1.1. Functional Description
Washer-extractors wash linen using water and nonvolatile chemicals and remove excess water
by centrifugal force.
60-series, Divided Cylinder Washer-extractor models are suspended washer-extractors with a
60 inch (1524 mm) diameter, walled cylinder for processing separate loads simultaneously.
60-series Staph Guard
®
models are front-loaded and rear-unloaded for use in soil-side/clean-side
barrier applications.
1.1.2. Machine Identification
Find the model number and other data for your machine on the machine data plate affixed to the
machine. See the figure that follows.
9
To Next Page
Loading...
