Need help?Do you have a question about the Milnor System 7 and is the answer not in the manual?
General| Extraction G-Force | 300 G |
|---|---|
| Capacity | 27 kg |
| Wash Speed | Variable |
| Extraction Speed | Variable |
| Water Consumption | Varies with cycle |
Explains the identification details on the manual's cover for reference.
Clarifies that troubleshooting is now in a dedicated chapter, not on yellow pages.
Lists trademarks of the manufacturer for informational purposes.
Provides contact information for user feedback and suggestions.
Details a specific change in the machine's mode switch functionality.
Outlines the terms, conditions, and limitations of the manufacturer's warranty.
Lists the necessary information to provide when ordering replacement parts.
Describes the overall documentation structure and intended audience.
Lists critical safety warnings and precautions for machine operation.
Details the necessary site conditions, space, and utility requirements for installation.
Provides instructions for safely moving, positioning, and anchoring the machine.
Explains how to connect utilities and make necessary adjustments for operation.
Explains the components and operation of the machine's drive system.
Details the hardware components of the microprocessor control system.
Describes the software, configurations, and wash formulas for the control system.
Guides the user through the standard operating sequence and procedures.
Provides diagnostic procedures to test machine inputs, outputs, and display.
Outlines the schedule and procedures for routine maintenance and lubrication.
Covers procedures for servicing drive train components like belts and pulleys.
Details the steps for removing and replacing the main bearing housing.
Explains the process for removing, repairing, and installing the jackshaft.
Provides guidelines for selecting appropriate fuses, breakers, and wire sizes.
To Next Page
