To Next PageTo Next Page
Need help?Do you have a question about the Milnor 60044WP2 and is the answer not in the manual?
General| Model | 60044WP2 |
|---|---|
| Category | Washer |
| Capacity | 60 lb |
| Phase | 3 |
| Voltage | 208-240V |
| Motor Type | Inverter |
Overview of controls on the Mark VI Non-Tilting Washer-extractors.
Identifies the location of essential and additional controls on the washer-extractor.
Explains the connection point for serial data transfer devices for programming.
Details primary controls for starting, stopping, selecting formulas, and monitoring machine operation.
Describes controls for opening/closing the door and jogging the cylinder for loading.
Explains miscellaneous controls for standard and optional machine functions.
Provides essential operating instructions for plant personnel using the machine.
Emphasizes critical safety requirements and hazards for machine operation.
Details the necessary checks for switch settings before operating the machine.
Guides the user through the process of loading goods into a non-tilting washer-extractor.
Explains how to select wash formulas for the machine, including local and Mildata options.
Outlines the prerequisites and steps to start a selected wash formula.
Explains the information displayed on the machine's run display during operation, covering various aspects.
Provides instructions for unloading goods from the machine, covering different end code procedures.
Covers situations requiring operator attention, including errors and manual chemical additions.
Explains errors that trigger an operator signal and how they appear on the display.
Describes how the machine signals for manual chemical additions or controls automatic pumps.
