Milnor 60044WP2 - 1.1.2. Where do I Connect the Data Storage Device?; 1.1.3. What are the Operating Controls?

Chapter 1. Controls
PELLERIN MILNOR CORPORATION
Figure 2: Serial Connection for Data Transfer
1.1.3.
What are the Operating Controls?
The primary operating controls are required to start and stop the machine, select wash formulas,
and monitor machine operation.
Figure 3: Mark V Controls
Switches and Controls Legend
.
A. Vacuum fluorescent
display
B. Master switch for power
C. Operator signal cancel
button
D. Operator signal light
E. Stop button
F. Run/Program keyswitch
G. Start button
8