Milwaukee LDM 30 - Measuring Procedure; Measurement Accuracy Considerations

6
30
30
30
30
1.5 sec
ENGLISH
MEASURING
After turning on point the laser at the target.
A live reading is displayed.
To freeze the measurement, press the
measure button.
Press the measure button again to begin
another live reading. The previous
measurements are moved up into the history
elds.
NOTE: Measuring errors can occur when
measuring on some target surfaces, such as
colourless liquids, glass, styrofoam or semi-
permeable surfaces or when aiming at high
gloss surfaces.
Press the measure button again to begin
another live reading. The previous
measurements are moved up into the history
elds.