40 MW150 & MW151 Bench Meters
2. Press GLP/ACCEPT to confirm.
3. Use keys to select the lot type (MANUAL, STABILITY or INTERVAL ###).
Note: Press RANGE/ to export only the selected lot to external storage.
4. Press GLP/ACCEPT to confirm.
5. With a lot selected, use keys to view the records stored in that lot.
6. Press RANGE/ to view, additional log data on the third LCD line: altitude, salinity,
date, time, calibration points, lot info.
11.2.2. Deleting Data
Manual Log on Demand & Stability Log
1. Press RCL to access the logged data.
LCD displays “PLEASE WAIT” followed by “LOG RECALL” with ACCEPT tag blinking and
the number of stored logs.
2. Press GLP/ACCEPT to confirm.
3. Use keys to select MANUAL or STABILITY lot type.
4. With a lot selected, press LOG/CLEAR to delete entire lot.
“CLEAR” is displayed with ACCEPT tag and lot name blinking.
To Next Page
Loading...
