EasyManua.ls Logo

Milwaukee pH54 User Manual

Milwaukee pH54
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SPECIFICATIONS
Range 0.0 to 14.0 pH
Resolution 0.01 pH
Accuracy (@25 °C) ±0.1 pH
Calibration Manual, at 2 points
through trimmers
pH electrode MA73600
Environment 0 to 50 °C; 100% RH
Battery type 3 x 1.5V, alkaline
Battery life more than 1500 hours
of continuous use
Dimensions 165 x 30 x 30 mm
Weight 80 g
ACCESSORIES
MA73600 Replaceable pH electrode
M10004B
pH 4.01 buer, 20 ml sachet,
25pcs.
M10007B
pH 7.01 buer, 20 ml sachet,
25pcs.
M10010B
pH 10.01 buer, 20 ml sachet,
25pcs.
MA9015
Electrode storage solution,
230ml
MA9016
Electrode cleaning solution,
230ml
M10000B
Electrode rinse solution, 20 ml
sachet, 25 pcs.
CERTIFICATION
Milwaukee Instruments conform to the CE European
Directives.
Disposal of Electrical & Electronic Equipment. Do not
treat this product as household waste. Hand it over to the
appropriate collection point for the recycling of electrical
and electronic equipment.
Disposal of waste batteries. This product contains
batteries. Do not dispose of them with other household
waste. Hand them over to the appropriate collection point
for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to www.milwaukeeinstruments.com (USA & CAN)
or www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely suitable for
your specific application and for the environment in which it is
used. Any modification introduced by the user to the supplied
equipment may compromise the meter’s performance. For
your and the meter’s safety do not use or store the meter
in hazardous environment. To avoid damage or burn, do not
perform any measurement in microwave ovens.
WARRANTY
This instrument is warranted against defects in materials
and manufacturing for a period of 2years from the date of
purchase. Electrode is warranted for 1 year. This warranty
is limited to repair or free of charge replacement if the
instrument cannot be repaired. Damage due to accidents,
misuse, tampering or lack of prescribed maintenance is
not covered by warranty. If service is required, contact
your local Milwaukee Instruments Technical Service. If the
repair is not covered by the warranty, you will be notified
of the charges incurred. When shipping any meter, make
sure it is properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance of
its products without advance notice.
ISTPH54 09/20
USER MANUAL
SATISFACTION
GUARANTEED
milwaukeeinstruments.com (USA & CAN)
milwaukeeinst.com
pH54
PRO Waterproof
pH Tester
Question and Answer IconNeed help?

Do you have a question about the Milwaukee pH54 and is the answer not in the manual?

Milwaukee pH54 Specifications

General IconGeneral
BrandMilwaukee
ModelpH54
CategoryMeasuring Instruments
LanguageEnglish

Summary

Specifications

Range and Resolution

Specifies the measurement range and precision of the pH tester.

Accuracy and Calibration

Details the accuracy of the pH tester and its calibration method.

Environmental and Battery Details

Covers operating environment, battery type, and battery life.

Dimensions and Weight

Provides the physical size and weight of the pH tester.

Accessories

Replaceable pH Electrode

Information on the MA73600 replaceable pH electrode.

Buffer Solutions

Details on pH buffer solutions for calibration.

Maintenance Solutions

Lists electrode storage, cleaning, and rinse solutions.

Certification and Disposal

CE and RoHS Compliance

Confirms compliance with European Directives.

Waste Disposal Guidelines

Instructions for proper disposal of electronic equipment and batteries.

Recommendations and Warranty

Usage Recommendations

Advice on suitability for application and avoiding hazardous environments.

Product Warranty

Details the warranty period and conditions for the instrument and electrode.

Operation and Maintenance

Conditioning the Electrode

Procedure to condition the pH electrode before use.

Calibration Procedure

Steps for performing two-point acid and alkaline calibration.

Basic Operation

Instructions for turning on, immersing, and reading measurements.

Electrode Replacement

Guide on how to safely replace the pH electrode.

Battery Replacement

Instructions for replacing the batteries in the pH tester.

Related product manuals