Product Description
8
Product Description
This section describes the features of this machine. Please use this section in conjunction with the operating
procedures described in this document to familiarize yourself with cutting procedures.
l
Mark sensor function
High-accuracy register mark reading sensors are used to automatically read register marks printed on
sheets. This allows distance correction, print origin setting, and sheet tilt correction. "Cutting Data with
Register Marks"(P. 77)
l
Two-stage clamping pressure selection function
The sheet clamping mechanism provides a choice of two clamping pressures, expanding the range of sheets
that can be used with this machine. High pressure greatly increases the clamping pressure, preventing sheet
slippage during long-sheet cutting.
Low pressure minimizes any damage to the sheet caused by the grit rollers during cutting. "Setting the
Clamp High/Low Mode"(P. 57)
l
ID cutting function
This allows data to be printed with an ID on a printer, enabling it to be detected and cut automatically using
this machine. "ID Cut Process"(P. 97)
l
Plug-in cutting software provided as standard
The MIMAKI plug-in cutting software enables text and graphics edited in Illustrator to be cut easily and
cleanly. "Installing Cutting Software and Plotter Driver"(P. 20)
l
Cutting using Windows plotter driver
Using the Windows plotter driver allows cutting data to be output from applications such as Microsoft Word
and Excel in addition to the MIMAKI SimplePOP design software. For more information on the supported
applications, refer to "Readme" on the installation screen for the Windows plotter driver. "Installing
Cutting Software and Plotter Driver"(P. 20)
l
Heavy-weight media cutting and creasing
Heavy-weight media can be cut and creased using the sheet table and cutting sheet. "Sheet Tables and
Cutting Sheet"(P. 152)
l
Roll stopper function (CG-100/130AR only)
The roll stopper prevents the sheet from rotating when the roll sheet is pulled out. A roll stopper mechanism
is used to reduce roll sheet meandering. The improved sheet feeding surface also reduces roll sheet
jamming. This eliminates unwanted problems. "Roll stopper"(P. 53)
To Next Page
Loading...
Need help?
General
