MIMAKI CJV30-100 Service Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
Maintenance Manual Contents R.1.2 P.3
Maintenance Manual > Maintenance Manual Contents
Model CJV30/TPC Issued 2008.08.04 Revised 2009.08.27 F/W ver. 2.00 Remark
Maintenance Manual Contents
1.2
Rev.
6.5.1 Power Supply PCB Assy
6.5.2 Main PCB Assy
6.5.3 PRAM PCB Assy
6.5.4 Head Memory PCB Assy
6.5.5 LED PCB Assy
6.5.6 Station PCB Assy
6.5.7 Paper Sensor
6.5.8 X-axis Motor Relay PCB Assy
6.5.9 Ink Slider PCB Assy
6.5.10 Cutter Slider PCB Assy
6.5.11 Keyboard PCB Assy
6.5.12 Encoder PCB Assy
6.5.13 Fan Motor
6.5.14 Take-up Motor PCB Assy
6.5.15 ID Contact PCB Assy
6.5.16 Detector Assy, I/C, Y
6.5.17 Replacement procedure for fuse of the
Main PCB
6.6 Sensors
6.6.1 Sensor Layout
7 Troubleshooting
7.1 Details on Errors and Malfunctions
7.1.1 Concerning Errors and Malfunctions
7.1.2 List of Error Messages
7.1.3 List of Warning Messages
7.1.4 Trouble with No Messages
7.2 Detailed Methods of Coping with the
Malfunctions
7.2.1 Y Drive Belt Noise
7.2.2 Media Attachment to the Platen
7.2.3 Electrical Troubleshooting
7.2.4 Y Drive Belt Damage
7.2.5 Heater temperature does not going up
7.3 Checksheet
7.3.1 PCB Damage Checksheet
8 Operation Flow
8.1 Basic Operation
8.1.1 Start
8.1.2 Initial Filling
8.1.3 Media Detection
8.2 Print Mode
8.2.1 LOCAL / REMOTE
8.2.2 SETUP
8.2.3 MAINTENANCE
8.2.4 MACHINE SETUP
8.3 Cut Mode
8.3.1 LOCAL / REMOTE
8.3.2 SETUP
8.3.3 MAINTENANCE / No. COPIES
8.4 Common Setting
8.4.1 COMMON SETUP
8.5 Service Mode
8.5.1 #ADJUST
8.5.2 #TEST
8.5.3 #PARAMETER

MIMAKI CJV30-100 Specifications

General

Brand	MIMAKI
Model	CJV30-100
Category	Printer
Language	English