6-38
When You Do Not Want the Confirmation Message of the Waste Ink Tank to Be Displayed
You can configure the setting so that the confirmation message of the waste ink tank is not displayed.
1
Press the key in LOCAL to select the
printing mode.
2
Select [Waste Ink Warning] of the machine setting menu.
(1)Press the key.
(2)Press to select [MACHINE SETUP] and press the key.
(3)Press to select [Waste Ink Warning].
(4)Press the key.
3
Press to select OFF.
4
Press the key.
5
Press the key several times to end the setting.
• When you set Waste ink warning to "OFF", the confirmation message is not displayed. Make sure to
visually check the amount of ink remaining in the waste ink tank.
<LOCAL. 1> [ #01 ]
WIDTH:****mm
Wa s t e I n k Wa r n i n g
SETUP :
OFF
MACH I N E S E T UP
Wa s t e I n k Wa r n i n g < e n t >
To Next Page
Loading...
