6-21
6
Maintenance
When Nozzle Clogging Cannot Be Solved
When nozzle clogging cannot be solved even after the ink head cleaning ( P.2-40) or head nozzle washing
( P.6-11) has been done, perform the following two functions:
FILL UP INK
1
Press the key in LOCAL to select the
printing mode.
2
Select [HD. MAINTENANCE] of the maintenance menu.
(1)Press the key.
(2)Press to select [MAINTENANCE] and press the key.
(3)Press to select [HD. MAINTENANCE].
(4)Press the key.
3
Press the key.
• Ink is supplied automatically.
• When ink has been supplied completely, the screen returns to the
shown on the right.
4
Press the key several times to end the setting.
When 600cc cartridge is used
Q Even when [Ink Level] is displayed, enough ink for head cleaning may remain in the ink pack.
When [Ink Level] appears, see "When [Ink Level] is displayed" in the provided manual "When using
600 cc cartridge" and enter the current weight of the 600cc cartridge.
Q When the remaining ink is not enough for head cleaning
When the remaining ink is not enough for head cleaning, an error
shown on the right appears on the step 3. Replace with a new ink
pack, and then perform head cleaning again.
FILL UP INK
• Ink is supplied to solve nozzle clogging.
DISCHARGE & WASH
• The head, tube, and damper are washed with dedicated cleaning solution (optional).
( P.6-22)
<LOCAL . 1> [ #01 ]
WIDTH:****mm
FILLING UP
00 : 00
HD . MA I NTENANCE
FI LL UP INK <en t >
* * * 600cc Er r o r * * *
sho r t age o f i nk .
To Next Page
Loading...
