1-14
Inserting Ink Cartridges
Insert ink cartridges.
1
Shake the ink cartridge as shown on the right.
2
Insert the ink cartridge.
• Insert the ink cartridge lengthwise with the surface having IC
chips pointing to the left side.
• Colors are displayed on the display as follows.
Black: K, Cyan: C, Magenta: M, Yellow: Y
Changing an Ink Cartridge
Perform as follows when [INK END] or [NEAR END] is displayed on the display.
z When [INK END] is displayed
(1) Pull out the ink cartridge to be replaced.
(2) Replace with a new ink pack and a new IC chip. (See the label attached on the eco case for
details.)
(3) Insert an ink cartridge.
z When [NEAR END] is displayed
There is a little ink left. Though printing can be continued even if it is displayed, it is recommended to replace
the ink cartridge as soon as possible to avoid running out of ink during printing.
• While [NEAR END] is displayed, the cleaning during printing does not work. ( P.3-26)
To Next Page
Loading...
