This chapter
describes the operation procedures for using the printing function more conveniently and
each setting procedure.
About User Types ....................................... 3-2
Registering All Printing Conditions Together
(Type Registration) ...................................... 3-2
How to Register User Types ....................... 3-2
Setting the Pinch Rollers ........................... 3-5
Recommended Setting for the Pinch Roller
Pressure ...................................................... 3-5
Quantity of Pinch Rollers ............................. 3-5
Setting for the Pinch Rollers ........................ 3-6
Setting Media Correction ........................... 3-8
Setting Media Correction ............................. 3-8
If the Positions of Dots Shift.................... 3-10
Changing the Set Values of the Heaters. 3-12
Changing the Temperature Settings for
the Heaters ................................................ 3-12
Adjustment to an Appropriate
Temperature .............................................. 3-14
When the Heater Temperature Does Not
Reach the Preset One ............................... 3-15
Setting the Printing Method..................... 3-16
Setting of Printing Quality .......................... 3-16
Setting a Scanning Direction ..................... 3-18
Setting Logical Seek ................................. 3-19
Setting Drying Time .................................. 3-20
Setting Priority Order................................ 3-22
Setting Automatic Cleaning ..................... 3-24
Setting Cleaning during Printing ............. 3-26
Other Settings ........................................... 3-27
Copying the Set Contents ........................ 3-29
Initializing the Settings ............................. 3-30
Machine Settings....................................... 3-31
Setting the DEODORIZE FAN ...................3-31
Setting the DRYNESS FEED .....................3-32
Stamp Setting ............................................3-33
Setting the Test Print Arrange ...................3-34
When using 600 cc cartridge
(firmware Ver.2.10 or older ) ......................3-35
When using 600 cc cartridge
(firmware Ver.2.20 or later) ........................3-41
Change the operation condition of the
ambient temperature ..................................3-47
Extension of Ink Expiry Month................. 3-48
Switch Setting of Ink Supply Path ........... 3-50
Chapter 3
Extended Functions – Printer –
To Next Page
Loading...
